Stick Electrodes

LONGEVITY offers stick electrodes which have excellent welding characteristics that go very well with the ThunderArc rods that the company provides. LONGEVITY provides the commercial welders with electrodes that are necessary to complete projects of different sizes. The stick electrodes of the company are of fantastic quality and can secure a precise weld. For detailed information, please call us at 877-566-4462.

LONGEVITY WELDING PRODUCT NAME TYPE AWS DIAMETER inches(mm) LENGTH inches(mm) WELDING POSITION TYPICAL APPLICATION
THUNDER ARC E6013 3/32"(2.4mm) THUNDER ARC E6013 3/32"(2.4mm) mild steel E6013 3/32"(2.4mm) 14"(350mm) ALL sheet metal, maintenence and repair
THUNDER ARC E6013 1/8" (3.2mm) THUNDER ARC E6013 1/8"(3.2mm) mild steel E6013 3/32"(2.4mm) 14"(350mm) ALL sheet metal, maintenence and repair
THUNDER ARC E7018 3/32" (2.4 mm) THUNDER ARC E7018 3/32"(2.4mm) mild steel E6013 1/8"(3.2) 14"(350mm) ALL sheet metal, maintenence and repair
THUNDER ARC E7018 1/8" (3.2mm) THUNDER ARC E7018 1/8"(3.2mm) mild steel E6013 1/8"(3.2) 14"(350mm) ALL sheet metal, maintenence and repair
THUNDER ARC E6011 3/32" (2.4mm) THUNDER ARC E6011 3/32"(2.4mm) mild steel E7018 3/32"(2.4mm) 14"(350mm) ALL mild steel, power generation and pressure piping
THUNDER ARC E6011 1/8 (3.2mm) THUNDER ARC E6011 1/8"(3.2mm) mild steel E7018 3/32"(2.4mm) 14"(350mm) ALL mild steel, power generation and pressure piping

Stick Welding and why use it

The stick welding is the most basic of the welding processes. It offers an easy way to join steel and other metals. The process of stick welding joins the metals when an arc struck occurs between the electrode and the work piece and a weld pool is created. At the same time is deposited consumable metal electrode into the joint. The electrode comes with a protective coating which acts as a shielding gas. It is protecting the well, keeping it pure and strong. The processes of stick electrodes and welding are used in windy environments and on rusted metals

AWS Class

Position

Polarity

Usage

E6010

All

DCEP

A great choice for welding on dirty, rusty, greasy or painted steel - especially in vertical or overhead applications.

E6011

All

AC,DCEP

All-purpose stick electrode; used for carbon and galvanized steel; 60,000 PSI tensile strength; deep penetration and ideal for welding light to medium amounts of dirty, rusty or painted materials.

E6013

All

AC,DCEN,

DCEP

Light to medium penetrating all-purpose stick electrode; for use on carbon steel; 60,000 PSI tensile strength; good for general all-purpose applications and joints with poor fit-up.

E7014

All

AC,DCEN,

DCEP

For higher-deposition requirements; 70,000 PSI tensile strength; ideal for applications requiring light penetration and faster travel speeds.

E7018

All

DCEP

Low-hydrogen electrode; for low, medium and high-carbon steels; 70,000 PSI tensile strength; ideal for out-of-position welding and tacking; not recommended for low-voltage AC Welders.

E7018AC

All

AC,DCEP

Low-hydrogen electrode; for low, medium and high-carbon steels; 70,000 PSI tensile strength; ideal for out-of-position welding and tacking; specially formulated to operate with small 208/230 volt AC welders.